Trims and moldings are an integral part of any
flooring instalation. We have simplified the selection
by only including those trims and moldings neccesary
for the product you have selected. These are shown
on the product detail page below your selected
product.See How to order online.
The information contained on this page is everything
you need to know to correctly select the trims
and moldings you will need, it is a very simple
process once armed with the correct information.
Quarter
round
Used
to provide expansion area coverage where the existing
wall base will remain in place.
Reducer
Bridges
the gap between two uneven surfaces, reducing from
laminate to thinner floor covering products such
as vinyl.
Square
nose
Used
to provide a smooth transition from the laminate
flooring surface to adjacent carpet installations,
sliding glass doors, floor to ceiling windows, or
bathtub and shower surrounds.
T-molding
Used
to bridge the expansion area required between
laminate floors, from one room to another, or
as a transition between laminate flooring and
a floor of equal height.
Stair
nose
Used
to provide a secure transition from the flooring
surface while allowing the floating flooring system
to expand and contract freely at the step-down location.
Base
board
Used
to provide an eye-pleasing transition from the laminate
floating flooring surface to the adjacent wall while
covering the required 5/16' expansion allowance along
perimeter walls.
